calliopes_pen: (oraclegreen Drummond Dark Shadows)
[personal profile] calliopes_pen
Yesterday, the bill arrived for Comcast. We expected this month’s bill to still reflect things from before we cut out watching cable due to whatever reason, but no. It’s better than that. This month, we seem to owe nothing, and we have been credited $65. So…next month the bill should be $5 once that's subtracted, until this returns to the expected $70 in November, I suspect.

Odd, but nice for once.

Meanwhile, as I hunt for a new computer, I realized that just in case of any emergency that requires me to go—either due to being forced to travel out of state again, or not—it might be best to search for laptops. So I’ve been looking at the HP* Pavilion 17 inch sort, since that’s held up well for Dad. He hasn’t had any problems with his, since he got it in 2013.

And since I prefer Windows 7, I purchased an OEM for Windows 7 Professional 64 bit, which should arrive sometime next week. I’ll use it once I have an appropriate laptop actually in my possession. I have also done in depth research of the Intel CPU, which one would allow an installation of 7 over 10, and which ones wouldn’t. I think I’ve figured that one out. I have far too many links gathered for all the steps to everything, so that’s what I’ve been doing this week! I also gathered all relating links to drivers that still support Windows 7 in either the CPU of Intel or AMD.

I also asked questions at Reddit, Seven Forums, Tom’s Hardware Forum, and Bleeping Computers so that I would have everything straight. As a side note, from one of those I gained the alternative of the Acer Aspire desktop, should other ideas not work. So that’s why I’ve been a bit quiet—research!

And on a non computer note, The Collinsport Historical Society has their round-up of everywhere that Dark Shadows can be found this Halloween season. If only I had Decades and TCM, I would be so happy on October 28th.

*We have a local place that works on all things HP, so if anything happens, straight to the manufacturer it can go.

(no subject)

Sep. 23rd, 2017 09:48 pm
catyuy: (Default)
[personal profile] catyuy
Moving to ABQ, New Mexico first thing it the morning

They All Went Through

Sep. 19th, 2017 06:35 am
calliopes_pen: (lost_spook Mina covets the ring)
[personal profile] calliopes_pen
The rest of the nominations have been approved for Yuletide.

✔ Count Dracula (1977)
Characters
✔ Renfield (Count Dracula 1977)
✔ Jonathan Harker (Count Dracula 1977)
✔ Dracula (Count Dracula 1977)
✔ Mina Westenra Harker (Count Dracula 1977)

✔ Dracula (TV 1968)
Characters
✔ Jonathan Harker (Dracula TV 1968)
✔ Mina Harker (Dracula TV 1968)
✔ John Seward (Dracula TV 1968)
✔ Lucy Weston (Dracula TV 1968)

One Fandom So Far, Two To Go

Sep. 18th, 2017 10:11 am
calliopes_pen: (lost_spook Lucy's throat Dracula's ring)
[personal profile] calliopes_pen
My nomination list for Yuletide has partially been reviewed. So as of right now, I can confirm this one. I'll let people know when the others make it through.

✔ Dracula - Bram Stoker
Characters
✔ Golden Krone Innkeeper's Wife (Dracula - Bram Stoker)
✔ Jonathan Harker (Dracula - Bram Stoker)
✔ John Seward (Dracula - Bram Stoker)
✔ Dracula (Dracula - Bram Stoker)

Fandom post: Saiyuki Reload BLAST

Sep. 18th, 2017 10:37 pm
meicdon13: (Default)
[personal profile] meicdon13

Saiyuki Reload BLAST E11 (9/10) → Slightly disappointed with how Goku acted in E13 once the situation escalated; spoilery? )

I defended the anime's portrayal of him in E02 but I'm siding with the disappointed peeps on this one.

Some other spoilery stuff. )

I can't believe that the episode this week is gonna be the last. Part of me still has trouble believing that we even got a BLAST anime in the first place, and now it's already ending :( I have no idea how the finale's going to go or if we're even going to have a S02 somewhere down the line.

calliopes_pen: (sallymn Xena life before coffee)
[personal profile] calliopes_pen
I found out what my computer model is. Until now, all I knew (since what was once written was lost to the mists of time, as the sticker wore off at some point) was it was just HP Compaq, since we hadn’t found the old paperwork for it as of yet. So I’m posting this mainly for my own sake, should I lose track of where I made a note of that.

HP Compaq dx2450 Microtower. I went to the support page for HP, and found the method for determining the type a particular model is.

So how did I find out? First, hit the plus sign around the Option 2 section. Their way didn’t work for me, and we never had HP Support Assistant in this computer, for whatever reason even back when it was still XP and would have had those original files. However, figure 1 mentions System Information. Typed in that, and the window that came up had everything, including a section for System Model. And there we have it.

Judging by this press release, it came out around April of 2008, if not earlier. Granted, my model was 32 bit, not the 64 bit they’re announcing. If that’s accurate, that means that the date I previously estimated is off by a few years. Should it make it another few months to 2018 prior to it being replaced, this one’s still going to have made it at least a decade. And should it still survive, we'll have it around as a spare, should its replacement have issues, or should Dad's laptop have problems down the line.

(no subject)

Sep. 14th, 2017 11:08 pm
suyari: (All in a days work)
[personal profile] suyari
It was seriously difficult to whittle down 106 icons to 13 - since I already had two on this account that were going nowhere.

Somehow comics still won out.

My loyalties are showing.

Just a head's up!

Sep. 14th, 2017 09:38 pm
suyari: (Wiccan at Work)
[personal profile] suyari
Gonna be importing my LJ since I refuse to agree to the new TOS. Sorry in advance!!

Really hope this works.

No More HP Printers For Me

Sep. 14th, 2017 08:38 am
calliopes_pen: (lost_spook enough necromancy)
[personal profile] calliopes_pen
Thanks to a firmware update from HP that was pushed yesterday, I believe I can safely cross off HP printers from my list of potential printer purchases.

Basically, the update blocks all non-HP ink from functioning correctly. There weren’t that many from HP that I had included on my list just yet, thanks to everybody's recommendations and advice (thank you for it, by the way) along the lines of Canon, Epson, and Brother.

This merely narrows the field a little more for me.

Note To Self

Sep. 13th, 2017 12:51 pm
calliopes_pen: (wolfbane_icons coffin Dracula fire)
[personal profile] calliopes_pen
Next year, I will try to remember to nominate Dracula The Undead, by Freda Warrington. (Not the Dacre Stoker novel of the same name) I love that unofficial continuation of the novel, and I have a prompt I'd love to see written someday. I just never have room and/or never think to nominate it until I've already done my nominations.

The Quest For A Printer Continues

Sep. 12th, 2017 01:50 pm
calliopes_pen: (54 IJ Edith silhouette books)
[personal profile] calliopes_pen
For when I eventually replace the printer that I had to toss out, I have a question for those on my reading/friends list. I’ve only had inkjets from HP up until now (I don’t know the names right now) and that last one never really worked right, while the first lasted about 15 years before it died.

Would anyone recommend any particular Epson or Brother printer models? I only recently heard of them for the first time during my research, so I don't know much about those brands. Or is HP still a good one to stick with for inkjet printers, despite that last one? I considered the HP Envy 7640, but was turned away by bad reviews I was reading for that particular model.

What I'm looking for is a reliable color inkjet printer, even if it's primarily documents I would be printing.

Is laser better/cheaper in the long run?
Page generated Sep. 25th, 2017 08:37 pm
Powered by Dreamwidth Studios